en
ori
alb
amh
ara
arm
aym
aze
bel
ben
bos
bul
bur
cs
dan
de
div
el
est
fil
fin
fra
gle
glg
grn
heb
hi
hkm
hrv
hu
ice
id
it
jp
kan
kin
kor
lao
lav
lit
ltz
lug
mao
may
mlt
nep
nl
nor
nya
orm
per
pl
pt
rom
ru
san
sk
som
spa
srp
swa
swe
tam
th
tr
ukr
urd
vie
wel
xho
The Ersa VERSAPRINT 2 ELITE plus prints solder paste before component placement. It fits production lines that already have a separate solder paste inspection station. Ersa describes the ELITE plus with an area-scan camera and two camera modules, with different illumination modes for locating features on the board. The adjustable stencil tray lets operators change between supported frame sizes without tools.
Veličina PCB-a | 50 × 50 to 680 × 500 mm |
|---|---|
PCB thickness | 0.5–6 mm |
Stencil frame size | 450 × 450 to 737 × 737 mm |
Published inspection area | 550 × 500 mm |
Board and stencil fit
Ersa lists a substrate range of 50 × 50 mm to 680 × 500 mm and a board thickness range of 0.5–6 mm. Its published inspection area is 550 × 500 mm, so check inspection coverage separately if you run long panels. The listed stencil frame range is 450 × 450 mm to 737 × 737 mm. The two independently controlled squeegee heads let the operator set printing force for the process.
Before replacing a printer, compare the outside dimensions of your stencil frames and the support positions on your largest panel. Boards with components already mounted underneath need a support layout that clears those parts. Send GEEKVALUE the frame dimensions, panel drawing and line direction for a quote that identifies the camera, underside cleaner and tooling included with the used unit.
