ASMPT publishes a maximum print area of 400 × 400 mm for the DEK TQ with the specified one-stage conveyor configuration. The TQ L has a different board envelope. If your largest panel is near the limit, send the panel drawing and rail arrangement so we can review the actual clamping and conveyor configuration of the DEK TQ offered.
Buyers comparing print stations often start with cycle time. ASMPT lists a five-second core cycle for the DEK TQ. For your line plan, time a representative board through transfer, alignment and printing with the cleaning interval you intend to use. Print strokes, stencil separation and cleaning frequency can change the time between boards. If the equipment is replacing a bottleneck, include your current process settings and target output in the inquiry.
The DEK TQ platform offers options for board support, paste dispensing and integration with solder paste inspection. Ask which hardware and software are included in the quote if the equipment has to match an existing line. We supply the printer and can review the requested configuration against your frame, PCB and production requirements. Send your panel size, stencil frame and any SPI interface requirements for quotation. Where automatic tooling is a purchasing requirement, ask for the included pin hardware and a demonstration on your board.
| Buying consideration | Details to confirm |
|---|---|
| 모델 | DEK TQ and fitted conveyor configuration |
| Print envelope | 400 × 400 mm published for the stated setup |
| Installed options | Board support, paste dispensing and SPI interfaces |
| Cycle test | Representative PCB and cleaning interval |





