The YB850 is listed for inspecting the stencil itself before solder paste printing. On a new stencil, inspect the size and position of the openings and look for missing or extra apertures. On a stencil returning from cleaning, inspect for blocked openings or debris before sending the frame back to the printer. The two jobs call for different acceptance criteria, especially if the shop runs fine-pitch and general-purpose stencils on the same line.
| Stencil check | What to look for |
|---|---|
| Opening geometry | Aperture size, area and position |
| Pattern integrity | Missing, extra and blocked openings |
| Aperture condition | Burrs or foreign material around the openings |
To evaluate the machine, provide a frame from your smallest-aperture job and one with a known defect. Specify the frame size, finest opening and reference data format. A sample inspection can show whether the quoted configuration can measure the geometry you need and distinguish an acceptable opening from one that should be cleaned again or rejected.





