product
GKG DH3505S Automatic SMT Dispensing Machine

GKG DH3505S Automatic SMT Dispensing Machine

GKG DH3505S automatic SMT dispensing machine featuring non-contact jet dispensing, dual-valve operation, precision glue control and flexible PCB handling.

ዝርዝሮች

The GKG DH3505S is presented as an SMT dispensing machine under the GKG DH product range. GKG's official DH series is designed for high-speed precision dispensing on electronic substrates and PCBs. Unlike stencil printers that transfer solder paste through stencil apertures, the DH series uses dispensing valves to apply controlled amounts of adhesive or other process materials directly onto designated positions.

The DH series uses non-contact jet dispensing technology to improve dispensing consistency and reduce material waste. Its motion system combines servo motors and screw-driven mechanisms for controlled movement along the X, Y, and Z axes.

Depending on the selected dispensing configuration, the system supports synchronous dual-valve operation, asynchronous dual-valve operation, and rotary or tilting dispensing functions.

Dispensing System

GKG's DH series uses non-contact injection valves for precision material application. This dispensing method allows materials to be deposited without requiring the dispensing valve to maintain contact with the PCB surface.

Motion and Positioning

The machine uses a servo motor and screw-driven motion system. GKG specifies an XYZ repeat positioning accuracy of ±15 μm at 4 sigma, with CPK greater than 1.33 for the DH series.

Dispensing Head and Glue Control

The DH series supports synchronous and asynchronous dual-valve functions, as well as rotary and tilting dispensing configurations. Its precision glue control system supports 0.1 mg and 0.01 mg control specifications, depending on the selected configuration.

ቴክኒካዊ ዝርዝሮች

መለኪያGKG DH Series Specification
የምርት ስምGKG
Model IdentificationDH3505S (machine photo)
Product SeriesDH Series
Machine TypeHigh Speed Precision Dispensing Machine
XYZ Repeat Positioning Accuracy±15 μm @ 4σ
CPKGreater than 1.33
Motion DriveServo Motor + Screw Drive
Maximum X-Axis Speed800 mm/sec
Maximum Y-Axis Speed800 mm/sec
Maximum Z-Axis Speed400 mm/sec
PCB መጠን ክልል50 × 50 mm to 510 × 686 mm
Track ConfigurationSingle Track / Dual Track
Additional Transport OptionsBottom Heating / Three-Stage Independent Transfer
Dispensing Head FunctionsSynchronous Dual Valve / Asynchronous Dual Valve / Rotary Tilt
Precision Glue Control0.1 mg / 0.01 mg
DH Series Machine Dimensions1020 × 1500 × 1500 mm

Important: The specifications above are published by GKG for its DH series as a whole. They are not independently verified DH3505S-specific specifications. Actual machine dimensions, dispensing head configuration, and performance should be confirmed against the machine's original specification sheet.

Dispensing Process Applications

According to GKG, its D and DH series equipment supports bottom filling, pin encapsulation, precision coating, package-on-package (PoP) stacking, dam filling, SMT red glue dispensing, COB packaging, hot-melt adhesive bonding, and FPC component reinforcement.

GKG DH3505S Dispensing Machine for Sale

Contact us for GKG DH3505S availability, actual machine photos, installed dispensing valve configuration, technical specifications, and pricing.

Please provide your dispensing material and PCB requirements when requesting a quotation.

GKG DH3505S Automatic SMT Dispensing Machine

ለምንድነው ብዙ ሰዎች ከGekValue ጋር ለመስራት የሚመርጡት?

የእኛ የምርት ስም ከከተማ ወደ ከተማ እየተሰራጨ ነው፣ እና ስፍር ቁጥር የሌላቸው ሰዎች "GekValue ምንድን ነው?" ብለው ጠየቁኝ። ከቀላል እይታ የመነጨ፡ የቻይናን ፈጠራ በቴክኖሎጂ ለማበረታታት ነው። ይህ ቀጣይነት ያለው የማሻሻያ ብራንድ መንፈስ ነው፣ ያለማቋረጥ ዝርዝር ፍለጋችን ውስጥ የተደበቀ እና በእያንዳንዱ አቅርቦት ከሚጠበቀው በላይ የምንጠብቀው ደስታ። ይህ ከሞላ ጎደል አሰልቺ ጥበብ እና ትጋት የመሥራቾቻችን ጽናት ብቻ ሳይሆን የምርት ስምችን ይዘት እና ሙቀትም ጭምር ነው። እዚህ ለመጀመር እና ፍጹምነትን ለመፍጠር እድል እንደሚሰጡን ተስፋ እናደርጋለን. ቀጣዩን "ዜሮ ጉድለት" ተአምር ለመፍጠር በጋራ እንስራ።

ዝርዝሮች
GEEKVALUE

Geekvalue: ለ ይምረጡ-እና-ቦታ ማሽኖች የተወለደ

አንድ-ማቆሚያ የመፍትሄ መሪ ለቺፕ መጫኛ

ስለ እኛ

ለኤሌክትሮኒክስ ማምረቻ ኢንዱስትሪ መሣሪያዎች አቅራቢ እንደመሆኖ፣ Geekvalue ከታዋቂ ብራንዶች ብዙ አዳዲስ እና ያገለገሉ ማሽኖችን እና መለዋወጫዎችን በጣም በተወዳዳሪ ዋጋ ያቀርባል።

የእውቂያ አድራሻ፡-ቁጥር 18፣ የሻንግሊያኦ ኢንዱስትሪያል መንገድ፣ ሻጂንግ ከተማ፣ ባኦአን አውራጃ፣ ሼንዘን፣ ቻይና

የምክክር ስልክ ቁጥር፡-+86 13823218491

ኢሜይል፡-smt-sales9@gdxinling.cn

አግኙን።

© ሁሉም መብቶች የተጠበቁ ናቸው። የቴክኒክ ድጋፍ:TiaoQingCMS

kfweixin

WeChat ለማከል ይቃኙ

ጥቅስ ይጠይቁ