product
GKG DH3505S Automatic SMT Dispensing Machine

GKG DH3505S Automatic SMT Dispensing Machine

GKG DH3505S automatic SMT dispensing machine featuring non-contact jet dispensing, dual-valve operation, precision glue control and flexible PCB handling.

Yksityiskohdat

The GKG DH3505S is presented as an SMT dispensing machine under the GKG DH product range. GKG's official DH series is designed for high-speed precision dispensing on electronic substrates and PCBs. Unlike stencil printers that transfer solder paste through stencil apertures, the DH series uses dispensing valves to apply controlled amounts of adhesive or other process materials directly onto designated positions.

The DH series uses non-contact jet dispensing technology to improve dispensing consistency and reduce material waste. Its motion system combines servo motors and screw-driven mechanisms for controlled movement along the X, Y, and Z axes.

Depending on the selected dispensing configuration, the system supports synchronous dual-valve operation, asynchronous dual-valve operation, and rotary or tilting dispensing functions.

Dispensing System

GKG's DH series uses non-contact injection valves for precision material application. This dispensing method allows materials to be deposited without requiring the dispensing valve to maintain contact with the PCB surface.

Motion and Positioning

The machine uses a servo motor and screw-driven motion system. GKG specifies an XYZ repeat positioning accuracy of ±15 μm at 4 sigma, with CPK greater than 1.33 for the DH series.

Dispensing Head and Glue Control

The DH series supports synchronous and asynchronous dual-valve functions, as well as rotary and tilting dispensing configurations. Its precision glue control system supports 0.1 mg and 0.01 mg control specifications, depending on the selected configuration.

Tekniset tiedot

ParametriGKG DH Series Specification
MerkkiGKG
Model IdentificationDH3505S (machine photo)
Product SeriesDH Series
Machine TypeHigh Speed Precision Dispensing Machine
XYZ Repeat Positioning Accuracy±15 μm @ 4σ
CPKGreater than 1.33
Motion DriveServo Motor + Screw Drive
Maximum X-Axis Speed800 mm/sec
Maximum Y-Axis Speed800 mm/sec
Maximum Z-Axis Speed400 mm/sec
Piirilevyn kokoalue50 × 50 mm to 510 × 686 mm
Track ConfigurationSingle Track / Dual Track
Additional Transport OptionsBottom Heating / Three-Stage Independent Transfer
Dispensing Head FunctionsSynchronous Dual Valve / Asynchronous Dual Valve / Rotary Tilt
Precision Glue Control0.1 mg / 0.01 mg
DH Series Machine Dimensions1020 × 1500 × 1500 mm

Important: The specifications above are published by GKG for its DH series as a whole. They are not independently verified DH3505S-specific specifications. Actual machine dimensions, dispensing head configuration, and performance should be confirmed against the machine's original specification sheet.

Dispensing Process Applications

According to GKG, its D and DH series equipment supports bottom filling, pin encapsulation, precision coating, package-on-package (PoP) stacking, dam filling, SMT red glue dispensing, COB packaging, hot-melt adhesive bonding, and FPC component reinforcement.

GKG DH3505S Dispensing Machine for Sale

Contact us for GKG DH3505S availability, actual machine photos, installed dispensing valve configuration, technical specifications, and pricing.

Please provide your dispensing material and PCB requirements when requesting a quotation.

GKG DH3505S Automatic SMT Dispensing Machine

Miksi niin monet ihmiset valitsevat GeekValuen?

Brändimme leviää kaupungista toiseen, ja lukemattomat ihmiset ovat kysyneet minulta: "Mikä on GeekValue?" Se juontaa juurensa yksinkertaisesta visiosta: voimaannuttaa kiinalaista innovaatiota huipputeknologialla. Tämä on jatkuvan parantamisen brändihenki, joka piilee yksityiskohtien tavoittelussamme ja odotusten ylittämisen ilossa jokaisella toimituksella. Tämä lähes pakkomielteinen käsityötaito ja omistautuminen ei ole vain perustajiemme sinnikkyyttä, vaan myös brändimme ydin ja lämpö. Toivomme, että aloitat tästä ja annat meille mahdollisuuden luoda täydellisyyttä. Tehdään yhdessä töitä seuraavan "nollavirheellisen" ihmeen luomiseksi.

Yksityiskohdat
GEEKVALUE

Geekvalue: Born for Pick-and-Place Machines

Yhden luukun ratkaisun johtaja siruasennusta varten

Tietoja meistä

Elektroniikkateollisuuden laitetoimittajana Geekvalue tarjoaa valikoiman uusia ja käytettyjä koneita ja tarvikkeita tunnetuilta merkeiltä erittäin kilpailukykyiseen hintaan.

Yhteystiedot:No. 18, Shangliao Industrial Road, Shajing Town, Baoan District, Shenzhen, Kiina

Konsultaatiopuhelinnumero:+86 13823218491

Sähköposti:smt-sales9@gdxinling.cn

OTA YHTEYTTÄ

© Kaikki oikeudet pidätetään. Tekninen tuki: TiaoQingCMS

kfweixin

Skannaa lisätäksesi WeChatin

Pyydä tarjous