product
Ersa POWERFLOW ULTRA Wave Soldering Machine

Ersa POWERFLOW ULTRA Wave Soldering Machine

Get an Ersa POWERFLOW ULTRA wave soldering quote. Verify transport width, nitrogen utilities, and preheat for your PCB or pallet.

ዝርዝሮች

The POWERFLOW ULTRA is Ersa’s full-tunnel nitrogen wave soldering platform. We supply it for through-hole assembly lines where the conveyor, fluxing, preheat and solder wave need to work as one process. Ersa offers finger and frame transport across different working widths. If your current process runs a pallet, send its outside dimensions and loaded weight along with the PCB drawing. Pallet dimensions and the way it engages the conveyor determine the fit at the machine entrance.

Thick boards and assemblies with large copper planes are good candidates for a profile review. Share the board thickness, typical product mix, solder alloy and production target. The installed preheat arrangement and conveyor setup determine how much flexibility is available when you set the profile. For a machine already in service, ask about the fitted wave hardware and the condition of the pot and transport system.

A wave soldering installation also needs to fit the factory. Include the available nitrogen supply and your facility’s exhaust and power requirements. If the installation replaces an older wave line, record the upstream and downstream conveyor heights and transfer direction so these can be checked against the offered configuration. Request a quotation with the working width, transport style, heating configuration and included equipment listed. A production trial with a loaded pallet can then check transfer, thermal profile and soldering results as part of the same run.

Buying considerationDetails to confirm
TransportFinger or frame transport and working width
Thermal processPreheat layout, alloy and loaded pallet
UtilitiesNitrogen, electrical supply and exhaust
Line fitTransfer height, flow direction and machine length

Ersa POWERFLOW ULTRA wave soldering machine

ለምንድነው ብዙ ሰዎች ከGekValue ጋር ለመስራት የሚመርጡት?

የእኛ የምርት ስም ከከተማ ወደ ከተማ እየተሰራጨ ነው፣ እና ስፍር ቁጥር የሌላቸው ሰዎች "GekValue ምንድን ነው?" ብለው ጠየቁኝ። ከቀላል እይታ የመነጨ፡ የቻይናን ፈጠራ በቴክኖሎጂ ለማበረታታት ነው። ይህ ቀጣይነት ያለው የማሻሻያ ብራንድ መንፈስ ነው፣ ያለማቋረጥ ዝርዝር ፍለጋችን ውስጥ የተደበቀ እና በእያንዳንዱ አቅርቦት ከሚጠበቀው በላይ የምንጠብቀው ደስታ። ይህ ከሞላ ጎደል አሰልቺ ጥበብ እና ትጋት የመሥራቾቻችን ጽናት ብቻ ሳይሆን የምርት ስምችን ይዘት እና ሙቀትም ጭምር ነው። እዚህ ለመጀመር እና ፍጹምነትን ለመፍጠር እድል እንደሚሰጡን ተስፋ እናደርጋለን. ቀጣዩን "ዜሮ ጉድለት" ተአምር ለመፍጠር በጋራ እንስራ።

ዝርዝሮች
GEEKVALUE

Geekvalue: ለ ይምረጡ-እና-ቦታ ማሽኖች የተወለደ

አንድ-ማቆሚያ የመፍትሄ መሪ ለቺፕ መጫኛ

ስለ እኛ

ለኤሌክትሮኒክስ ማምረቻ ኢንዱስትሪ መሣሪያዎች አቅራቢ እንደመሆኖ፣ Geekvalue ከታዋቂ ብራንዶች ብዙ አዳዲስ እና ያገለገሉ ማሽኖችን እና መለዋወጫዎችን በጣም በተወዳዳሪ ዋጋ ያቀርባል።

የእውቂያ አድራሻ፡-ቁጥር 18፣ የሻንግሊያኦ ኢንዱስትሪያል መንገድ፣ ሻጂንግ ከተማ፣ ባኦአን አውራጃ፣ ሼንዘን፣ ቻይና

የምክክር ስልክ ቁጥር፡-+86 13823218491

ኢሜይል፡-smt-sales9@gdxinling.cn

አግኙን።

© ሁሉም መብቶች የተጠበቁ ናቸው። የቴክኒክ ድጋፍ:TiaoQingCMS

kfweixin

WeChat ለማከል ይቃኙ

ጥቅስ ይጠይቁ