product
Ersa POWERFLOW ULTRA Wave Soldering Machine

Ersa POWERFLOW ULTRA Wave Soldering Machine

Get an Ersa POWERFLOW ULTRA wave soldering quote. Verify transport width, nitrogen utilities, and preheat for your PCB or pallet.

פרטים

The POWERFLOW ULTRA is Ersa’s full-tunnel nitrogen wave soldering platform. We supply it for through-hole assembly lines where the conveyor, fluxing, preheat and solder wave need to work as one process. Ersa offers finger and frame transport across different working widths. If your current process runs a pallet, send its outside dimensions and loaded weight along with the PCB drawing. Pallet dimensions and the way it engages the conveyor determine the fit at the machine entrance.

Thick boards and assemblies with large copper planes are good candidates for a profile review. Share the board thickness, typical product mix, solder alloy and production target. The installed preheat arrangement and conveyor setup determine how much flexibility is available when you set the profile. For a machine already in service, ask about the fitted wave hardware and the condition of the pot and transport system.

A wave soldering installation also needs to fit the factory. Include the available nitrogen supply and your facility’s exhaust and power requirements. If the installation replaces an older wave line, record the upstream and downstream conveyor heights and transfer direction so these can be checked against the offered configuration. Request a quotation with the working width, transport style, heating configuration and included equipment listed. A production trial with a loaded pallet can then check transfer, thermal profile and soldering results as part of the same run.

Buying considerationDetails to confirm
TransportFinger or frame transport and working width
Thermal processPreheat layout, alloy and loaded pallet
UtilitiesNitrogen, electrical supply and exhaust
Line fitTransfer height, flow direction and machine length

Ersa POWERFLOW ULTRA wave soldering machine

למה כל כך הרבה אנשים בוחרים לעבוד עם GeekValue?

המותג שלנו מתפשט מעיר לעיר, ואינספור אנשים שאלו אותי, "מה זה GeekValue?". זה נובע מחזון פשוט: להעצים חדשנות סינית בעזרת טכנולוגיה מתקדמת. זוהי רוח מותג של שיפור מתמיד, החבויה במרדף הבלתי פוסק שלנו אחר פרטים ובהנאה של מעבר לציפיות בכל אספקה. אומנות ומסירות כמעט אובססיבית זו אינה רק ההתמדה של מייסדינו, אלא גם המהות והחום של המותג שלנו. אנו מקווים שתתחילו כאן ותתנו לנו הזדמנות ליצור שלמות. בואו נעבוד יחד כדי ליצור את נס "אפס פגמים" הבא.

פרטים
GEEKVALUE

Geekvalue: נולד עבור מכונות בחירה-ומקום

מוביל פתרון חד פעמי להרכבת שבבים

אודותינו

כספקית של ציוד לתעשיית ייצור האלקטרוניקה, Geekvalue מציעה מגוון של מכונות ואביזרים חדשים ומשומשים של מותגים ידועים במחירים תחרותיים מאוד.

כתובת ליצירת קשר:מס' 18, כביש תעשייתי Shangliao, טאון שאג'ינג, מחוז באואן, שנזן, סין

מספר טלפון לייעוץ:+86 13823218491

אֶלֶקטרוֹנִי:smt-sales9@gdxinling.cn

צרו קשר

© כל הזכויות שמורות. תמיכה טכנית: TiaoQingCMS

kfweixin

סרוק כדי להוסיף WeChat

בקשת הצעת מחיר