en
ori
alb
amh
ara
arm
aym
aze
bel
ben
bos
bul
bur
cs
dan
de
div
el
est
fil
fin
fra
gle
glg
grn
heb
hi
hkm
hrv
hu
ice
id
it
jp
kan
kin
kor
lao
lav
lit
ltz
lug
mao
may
mlt
nep
nl
nor
nya
orm
per
pl
pt
rom
ru
san
sk
som
spa
srp
swa
swe
tam
th
tr
ukr
urd
vie
wel
xho
The BTU Pyramax 150N z12 provides twelve upper and twelve lower heating zones across a 3,810 mm heated tunnel. Its longer thermal path gives process engineers more scope to develop a soldering profile while setting conveyor speed around the required production rate.
Air or nitrogen operation allows the process atmosphere to be selected for the soldering requirement. Nitrogen reduces oxygen exposure during reflow, although the operating oxygen level and gas consumption depend on the oven configuration, settings and product flow.
The published configuration includes two upper and two lower cooling zones. Cooling deserves attention alongside heating, particularly where the assembly requires a controlled temperature decline before handling.
We discuss the 150N z12 around the board profile and line loading. Oxygen monitoring, flux management, centre support and conveyor options are itemised when fitted, allowing the offered oven to be assessed against both process and installation requirements.
BTU Pyramax 150N z12 Reflow Oven Specifications
| T'aqa | Especificación ukax mä juk’a pachanakanwa |
|---|---|
| Murilu | Pyramax 150N z12 |
| Process atmosphere | Air or nitrogen |
| Heating zones | 12 upper / 12 lower |
| Heated length | 3,810 mm |
| Cooling zones | 2 upper / 2 lower |
| Cooling length | 1,168 mm |
| Published conveyor width range | 51–457 mm |
| Published conveyor speed range | Approximately 250–1,520 mm/min |
| Standard maximum temperature | 350°C |
| Optional maximum temperature | 400°C, where fitted |
| Published overall length | 6,474 mm |
