Flexible PCB Printing with SPI Feedback and Automatic Leveling
The Hanwha SP1-W stands out for its combination of printing accuracy, board-size flexibility, and feedback-based process correction. Its automatic print-offset correction uses feedback from solder paste inspection (SPI), helping production teams respond to printing defects instead of relying entirely on manual adjustments.
The machine supports single-lane PCB handling up to 510 × 460 mm. With an optional dual-lane configuration, it can accommodate boards up to 330 × 310 mm and support mixed-model production when integrated into a suitable line layout. Stage auto-leveling is standard, while the stated alignment repeatability is ±12.5 μm at 6σ.
For electronics manufacturers evaluating a used Hanwha SP1-W, the key purchasing considerations are the installed conveyor configuration, supported stencil dimensions, software and inspection-feedback functions, and the machine’s current operating condition. We can help buyers review available machine details against their intended PCB assembly requirements before making a sourcing decision.

ހަންވާ އެސްޕީ1-ޑަބްލިއު ގެ ޓެކްނިކަލް ސްޕެސިފިކޭޝަންސް
| ޕެރެމިޓަރ | ސްޕެސިފިކޭޝަން |
|---|---|
| މޮޑެލް | ހަންވާ އެސްޕީ1-ޑަބްލިއު |
| ޕްރިންޓިންގ އެކިއުރެސީ | ±12.5μm @ 6σ އެވެ |
| ރިޕީޓެބިލިޓީ | ±12μm އެވެ |
| ޕްރިންޓިންގ ސައިކަލް ޓައިމް | 5 ސިކުންތު (ޗާޕްކުރާ ވަގުތު ނުހިމަނައި) |
| މެކްސް ޕީސީބީ ސައިޒް (ޕްރޮސެސިންގ ބޯޑް ސައިޒް) | އެލް510އެމްއެމް × ޑަބްލިއު460އެމްއެމް |
| ސްޓެންސިލް ސައިޒް (މެކްސް) | 736އެމްއެމް × 736އެމްއެމް އެވެ |
| ސްޓެންސިލް ސައިޒް (ސްޓޭންޑަރޑް) | 350އެމްއެމް × 250އެމްއެމް އެވެ |
| ވިޝަން ސިސްޓަމް | ޑައުއަލް ކެމެރާ ފިޑަޝިއަލް އެލައިންމަންޓެވެ |
| ސާފުކުރުމުގެ ނިޒާމު | އޮޓޯ ޑްރައި / ވެޓް / ވެކިއުމް |
| ކޮންޓްރޯލް އިންޓަރފޭސް | ޖޮބް ލައިބްރަރީ އާއި އެކު ޓަޗްސްކްރީން |
| ޕަވަރ ސަޕްލައި | އޭސީ 220ވީ، 50/60އެޗްޒް އެވެ |
| މެޝިންގެ ބަރުދަން | ގާތްގަނޑަކަށް 1000ރ. 1،200 ކިލޯ އެވެ |




