SAKI BF-10D Dual-Lane 2D AOI | High-Speed SMT Inspection

The BF-10D’s defining feature is its dual-lane inspection arrangement: one inspection head handles two PCB lanes. SAKI developed this system for high-speed inline production of M-size boards, with a reference board format of 330 × 250 mm.

A high-speed color camera captures board images while a rigid gantry moves the camera across the inspection area. Multi-core CPU processing handles the captured image data. This combination supports rapid inspection without requiring a separate inspection head for each lane.

SAKI has published a takt-time capability as short as eight seconds under suitable operating conditions. Actual cycle time depends on the board design, inspection points, program complexity and line settings, so the published figure should be treated as a reference rather than a guaranteed rate for every product.

The two lanes can handle the same or different board configurations, according to SAKI’s product information. For a production-line assessment, compare the board mix and target takt time alongside lane spacing and conveyor compatibility.

SAKI BF-10D Specifications

Configuration note: Validate cycle time with representative boards and the intended inspection program before using the eight-second figure in production-capacity calculations.