en
ori
alb
amh
ara
arm
aym
aze
bel
ben
bos
bul
bur
cs
dan
de
div
el
est
fil
fin
fra
gle
glg
grn
heb
hi
hkm
hrv
hu
ice
id
it
jp
kan
kin
kor
lao
lav
lit
ltz
lug
mao
may
mlt
nep
nl
nor
nya
orm
per
pl
pt
rom
ru
san
sk
som
spa
srp
swa
swe
tam
th
tr
ukr
urd
vie
wel
xho
The JT NS-800II-N combines an eight-zone upper heating system with eight lower heating zones, allowing the PCB to receive heat from both sides as it moves through the oven. Its nitrogen configuration is intended for reflow processes that require an inert atmosphere to limit oxidation during soldering.
The heating and cooling stages work together to follow the thermal profile required by the solder paste and assembled components. With two cooling zones listed in the NS-800 series specifications, the machine supports controlled cooling after the solder reaches reflow temperature.
The conveyor accommodates PCBs up to 400 mm wide, with motorized rail adjustment across a 50–400 mm range. This range gives production engineers room to configure the conveyor for different board widths without manually rebuilding the rail arrangement for every product change.
For line planning, the oven's overall dimensions are approximately 5,606 × 1,350 × 1,440 mm. Confirm the exact NS-800II-N electrical requirements, conveyor direction and nitrogen-control options against the supplied machine configuration before installation.
JT NS-800II-N Nitrogen Reflow Oven Specifications
| Parametar | Specifikacija |
|---|---|
| Brend | JT |
| Model | NS-800II-N |
| Equipment type | SMT nitrogen reflow oven |
| Upper heating zones | 8 |
| Lower heating zones | 8 |
| Cooling zones | 2 |
| Maximum PCB width | 400 mm |
| Conveyor rail adjustment | 50–400 mm |
| Temperature setting range | Room temperature to 300°C |
| Temperature control | PID closed-loop control with SSR |
| Temperature control precision | ±1°C |
| PCB temperature deviation | ±1.5°C, according to JT board test standard |
| Conveyor height | Approx. 900 ± 20 mm |
| Machine dimensions (L × W × H) | Approx. 5,606 × 1,350 × 1,440 mm |
| Težina | Approx. 2,250 kg; confirm exact configuration |
| Electrical supply and power | Confirm from the NS-800II-N nameplate |
| Nitrogen configuration | Yes, indicated by the “N” suffix |
