yamaha yv180xg smt placement machine

Yamaha SMT YV180XG‌ is a high-speed/ultra-high-speed placement machine with the following main functions and features:

‌Patch speed and accuracy‌: The placement speed of YV180XG is 38,000CPH (number of placements per hour), and the placement accuracy is ±0.05mm‌.

‌Patch range and number of feeders‌: The placement machine can place components ranging from 0402 to SOP, SOJ, 84 Pins PLCC, 0.5mm Pitch 25mm QFP, etc., and is equipped with 80 feeders‌.

‌PCB size‌: Suitable for PCB size of L330×W330mm‌.

Operation steps and precautions

‌Operation steps‌:

Check the working status of the placement machine and the quality of circuit boards and electronic components.

Set placement parameters, including placement position, speed, pressure, etc.

Turn on the power of the placement machine, set the placement program, install the electronic component feeder, place the circuit board on the conveyor, start the placement program, and observe the action of the placement head.

Precautions:

Wear protective equipment before operation to ensure that the placement machine is in a stable state.

When replacing electronic components, ensure that the feeder has no current or voltage.

Check the working status of the placement machine at any time to ensure the placement quality and efficiency.

Clean and maintain before stopping to extend the service life of the machine.

Maintenance and troubleshooting methods

Maintenance: Clean and maintain the placement machine regularly to ensure that the placement machine is in the best working condition.

Troubleshooting:

If the placement head is stuck or the placement is inaccurate, check and clean the placement head.

If the electronic component feeding is abnormal, check whether the components in the feeder are blocked or lack of material.

If the pad is not firmly attached, please check the pad cleanliness and whether the placement pressure is appropriate.

If the placement machine is abnormal, try restarting or upgrading and calibrating the system