The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.
The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.
The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.
Printing System
The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.
Visión Alineación ukax mä juk’a pachanakanwa
The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.
Automatic Stencil Cleaning
The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.
PCB Positioning and Transport
The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.
Especificaciones Técnicas ukanaka
| Parámetro ukaxa | Especificación ukax mä juk’a pachanakanwa |
|---|---|
| Chimpu | GKG |
| Murilu | G5 |
| Machine Type | Fully Automatic SMT Stencil Printer |
| Repeat Positioning Accuracy | ±0.01 mm |
| Imprimir Chiqapa luraña | ±0.025 mm |
| Core Cycle Time | Less than 8 seconds, excluding printing and cleaning |
| PCB ukax mä jach’a uñacht’äwiwa | 50 × 50–400 × 340 mm |
| PCB Thixni ukaxa | 0,4–6 mm ukhakama |
| Maximum PCB Weight | 3 kg |
| Plantilla Marco Tamapa | Up to 737 × 737 mm |
| Stencil Frame Thickness | 20–40 mm |
| Print Heads | Two independent motorized print heads |
| Presión de Exprimidor ukaxa mä juk’a pachanakwa lurasi | 0–10 kg |
| Squeegee ukax mä juk’a pachanakanwa | 6–300 mm/sec |
| Conveyor ukaxa mä juk’a pachanakwa lurasi | 100–1500 mm/sec |
| Conveyor Height | 900 ±40 mm |
| Conveyor Direction | L-R, R-L, L-L, R-R |
| Cleaning Modes | Dry, Wet, Vacuum |
| Sistema de Visión ukax mä jach’a uñacht’äwiwa | Upward and downward CCD imaging |
| Control Method | PC Control |
| Presión de Aire ukaxa mä juk’a pachanakwa lurasi | 4–6 kg/cm² |
Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.
GKG G5 SMT Stencil Printer for Sale
Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.
Send us your requirements to receive a quotation.





