product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

Təfərrüatlar

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Görmə Alignment

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Texniki Spesifikasiyalar

ParametrSpesifikasiya
BrendGKG
ModelG5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Çap Dəqiqliyi±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
PCB ölçüsü50 × 50–400 × 340 mm
PCB qalınlığı0,4-6 mm
Maximum PCB Weight3 kg
Stencil Çərçivə ÖlçüsüUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Süpürgə təzyiqi0–10 kg
Süpürgə sürəti6–300 mm/sec
Konveyer sürəti100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
Görmə sistemiUpward and downward CCD imaging
Control MethodPC Control
Hava Təzyiq4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

Niyə bir çox insan GeekValue ilə işləməyi seçir?

Brendimiz şəhərdən şəhərə yayılır və saysız-hesabsız insan məndən "GeekValue nədir?" Bu, sadə bir baxışdan irəli gəlir: Çin innovasiyalarını qabaqcıl texnologiya ilə gücləndirmək. Bu, amansız təfərrüat axtarışımızda və hər çatdırılma ilə gözləntiləri aşmaq həzzimizdə gizlənən davamlı təkmilləşdirmə brend ruhudur. Bu, demək olar ki, obsesif sənətkarlıq və fədakarlıq təkcə təsisçilərimizin əzmkarlığı deyil, həm də brendimizin mahiyyəti və istiliyidir. Ümid edirik ki, siz buradan başlayacaqsınız və bizə mükəmməllik yaratmaq imkanı verəcəksiniz. Növbəti “sıfır qüsur” möcüzəsini yaratmaq üçün birlikdə çalışaq.

Təfərrüatlar
GEEKVALUE

Geekvalue: Pick-and-Place Maşınları üçün doğulub

Çip montajı üçün birdəfəlik həll lideri

Haqqımızda

Elektronika istehsalı sənayesi üçün avadanlıq tədarükçüsü olaraq, Geekvalue çox rəqabətli qiymətlərlə tanınmış markalardan bir sıra yeni və işlənmiş maşın və aksessuarlar təklif edir.

Əlaqə ünvanı:№ 18, Shangliao Industrial Road, Shajing Town, Baoan District, Shenzhen, Çin

Məsləhət telefon nömrəsi:+86 13823218491

E-poçt:smt-sales9@gdxinling.cn

ƏLAQƏ EDİN

© Bütün hüquqlar qorunur. Texniki Dəstək: TiaoQingCMS

kfweixin

WeChat əlavə etmək üçün skan edin

Sitat tələb edin