The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.
The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.
The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.
Printing System
The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.
Vision Alignment
The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.
Automatic Stencil Cleaning
The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.
PCB Positioning and Transport
The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.
နည်းပညာဆိုင်ရာသတ်မှတ်ချက်များ
| ကန့်သတ်ချက် | သတ်မှတ်ချက် |
|---|---|
| အမှတ်တံဆိပ် | GKG |
| မော်ဒယ် | G5 |
| Machine Type | Fully Automatic SMT Stencil Printer |
| Repeat Positioning Accuracy | ±0.01 mm |
| ပုံနှိပ်ခြင်း တိကျမှု | ±0.025 mm |
| Core Cycle Time | Less than 8 seconds, excluding printing and cleaning |
| PCB အရွယ်အစား | 50 × 50–400 × 340 mm |
| PCB အထူ | 0.4-6 မီလီမီတာ |
| Maximum PCB Weight | 3 kg |
| Stencil Frame အရွယ်အစား | Up to 737 × 737 mm |
| Stencil Frame Thickness | 20–40 mm |
| Print Heads | Two independent motorized print heads |
| Squeegee ဖိအား | 0–10 kg |
| Squeegee အရှိန် | 6–300 mm/sec |
| Conveyor Speed | 100–1500 mm/sec |
| Conveyor Height | 900 ±40 mm |
| Conveyor Direction | L-R, R-L, L-L, R-R |
| Cleaning Modes | Dry, Wet, Vacuum |
| အမြင်စနစ် | Upward and downward CCD imaging |
| Control Method | PC Control |
| လေဖိအား | 4–6 kg/cm² |
Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.
GKG G5 SMT Stencil Printer for Sale
Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.
Send us your requirements to receive a quotation.





