product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

Детаљи

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Усклађивање вида

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Техничке спецификације

ПараметарСпецификација
БрендGKG
МоделГ5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Тачност штампања±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
Величина штампане плоче50 × 50–400 × 340 mm
Дебљина штампане плоче0,4–6 mm
Maximum PCB Weight3 kg
Величина оквира шаблонаUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Притисак гумене шприце0–10 kg
Брзина гумене шприцеве6–300 mm/sec
Брзина транспортера100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
Систем видаUpward and downward CCD imaging
Control MethodPC Control
Ваздушни притисак4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

Зашто толико људи бира да сарађује са GeekValue-ом?

Наш бренд се шири из града у град, и безброј људи ме је питало: „Шта је GeekValue?“ То произилази из једноставне визије: оснажити кинеске иновације најсавременијом технологијом. Ово је дух бренда континуираног усавршавања, скривен у нашој неуморној тежњи ка детаљима и задовољству превазилажења очекивања са сваком испоруком. Ова готово опсесивна вештинa и посвећеност нису само упорност наших оснивача, већ и суштина и топлина нашег бренда. Надамо се да ћете почети овде и дати нам прилику да створимо савршенство. Хајде да заједно радимо на стварању следећег чуда „без недостатака“.

Детаљи
GEEKVALUE

Гееквалуе: Рођен за машине за бирање и постављање

Свеобухватно решење за монтажу чипова

О нама

Као добављач опреме за индустрију производње електронике, Гееквалуе нуди низ нових и половних машина и прибора реномираних брендова по веома конкурентним ценама.

Контакт адреса:бр. 18, Сханглиао Индустриал Роад, Схајинг Товн, Баоан Дистрицт, Схензхен, Кина

Број телефона за консултације:+86 13823218491

Имејл:smt-sales9@gdxinling.cn

КОНТАКТИРАЈТЕ НАС

© Сва права задржана. Техничка подршка: ТиаоКингЦМС

kfweixin

Скенирајте да бисте додали ВеЦхат

Захтевај понуду