product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

pojedinosti

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Usklađivanje vida

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Tehničke specifikacije

ParametarSpecifikacija
Robna markaGKG
ModelG5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Točnost ispisa±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
Veličina PCB-a50 × 50–400 × 340 mm
Debljina PCB-a0,4–6 mm
Maximum PCB Weight3 kg
Veličina okvira šabloneUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Tlak gumene špatule0–10 kg
Brzina brisača6–300 mm/sec
Brzina transportera100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
Sustav vidaUpward and downward CCD imaging
Control MethodPC Control
Tlak zraka4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

Zašto toliko ljudi odlučuje surađivati ​​s GeekValueom?

Naš brend se širi iz grada u grad, a bezbrojni ljudi su me pitali: "Što je GeekValue?" Proizlazi iz jednostavne vizije: osnažiti kineske inovacije vrhunskom tehnologijom. To je duh brenda koji se temelji na kontinuiranom poboljšanju, skriven u našoj neumornoj potrazi za detaljima i užitku premašivanja očekivanja sa svakom isporukom. Ova gotovo opsesivna vještina izrade i predanost nisu samo upornost naših osnivača, već i bit i toplina našeg brenda. Nadamo se da ćete ovdje započeti i dati nam priliku da stvorimo savršenstvo. Surađujmo kako bismo stvorili sljedeće čudo "bez grešaka".

pojedinosti
GEEKVALUE

Geekvalue: rođen za Pick-and-Place strojeve

Voditelj rješenja na jednom mjestu za montirač čipova

O nama

Kao dobavljač opreme za industriju proizvodnje elektronike, Geekvalue nudi niz novih i rabljenih strojeva i pribora renomiranih marki po vrlo konkurentnim cijenama.

Kontaktna adresa:No. 18, Shangliao Industrial Road, Shajing Town, Baoan District, Shenzhen, Kina

Broj telefona za konzultacije:+86 13823218491

E-pošta:smt-sales9@gdxinling.cn

KONTAKTIRAJTE NAS

© Sva prava pridržana. Tehnička podrška: TiaoQingCMS

kfweixin

Skenirajte da dodate WeChat

Zatražite ponudu