product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

جزئیات

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

هم‌ترازی بینایی

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

مشخصات فنی

پارامترمشخصات
برندGKG
مدلجی۵
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
دقت چاپ±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
اندازه PCB50 × 50–400 × 340 mm
ضخامت PCB۰.۴–۶ میلی‌متر
Maximum PCB Weight3 kg
اندازه قاب استنسیلUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
فشار اسکوئیجی0–10 kg
سرعت ساب ووفر6–300 mm/sec
سرعت نوار نقاله100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
سیستم بیناییUpward and downward CCD imaging
Control MethodPC Control
فشار هوا4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

چرا بسیاری از مردم تصمیم می‌گیرند با GeekValue کار کنند؟

برند ما از شهری به شهر دیگر در حال گسترش است و افراد بی‌شماری از من پرسیده‌اند: «GeekValue چیست؟» این از یک چشم‌انداز ساده سرچشمه می‌گیرد: توانمندسازی نوآوری چینی با فناوری پیشرفته. این روحیه بهبود مستمر برند است که در پیگیری بی‌وقفه جزئیات و لذت فراتر رفتن از انتظارات با هر تحویل پنهان شده است. این هنر و فداکاری تقریباً وسواس‌گونه نه تنها پشتکار بنیانگذاران ما، بلکه جوهره و گرمای برند ماست. امیدواریم از اینجا شروع کنید و به ما فرصتی برای خلق کمال بدهید. بیایید با هم همکاری کنیم تا معجزه بعدی «بدون نقص» را خلق کنیم.

جزئیات
GEEKVALUE

Geekvalue: متولد شده برای Pick-and-Place Machines

لیدر راه حل یک مرحله ای برای نصب تراشه

درباره ما

Geekvalue به عنوان تامین کننده تجهیزات برای صنعت تولید الکترونیک، مجموعه ای از ماشین آلات و لوازم جانبی جدید و دست دوم را از برندهای معروف با قیمت های بسیار رقابتی ارائه می دهد.

آدرس تماس:پلاک 18، جاده صنعتی شانگلیائو، شهر شاجینگ، منطقه بائوان، شنژن، چین

شماره تلفن مشاوره:+86 13823218491

ایمیل:smt-sales9@gdxinling.cn

تماس با ما

© کلیه حقوق محفوظ است. پشتیبانی فنی: TiaoQingCMS

kfweixin

برای افزودن WeChat اسکن کنید

درخواست قیمت