product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

Detaljer

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Synsjustering

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Tekniske spesifikasjoner

ParameterSpesifikasjon
MerkeGKG
ModellG5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Utskriftsnøyaktighet±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
PCB-størrelse50 × 50–400 × 340 mm
PCB-tykkelse0,4–6 mm
Maximum PCB Weight3 kg
Størrelse på sjablongrammeUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Naltrykk0–10 kg
Nalhastighet6–300 mm/sec
Transportbåndets hastighet100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
VisjonssystemUpward and downward CCD imaging
Control MethodPC Control
Lufttrykk4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

Hvorfor velger så mange å jobbe med GeekValue?

Merket vårt sprer seg fra by til by, og utallige har spurt meg: «Hva er GeekValue?» Det stammer fra en enkel visjon: å styrke kinesisk innovasjon med banebrytende teknologi. Dette er en merkevareånd for kontinuerlig forbedring, skjult i vår ustanselige jakt på detaljer og gleden ved å overgå forventningene med hver leveranse. Dette nesten obsessive håndverket og dedikasjonen er ikke bare grunnleggernes utholdenhet, men også essensen og varmen i merkevaren vår. Vi håper du vil starte her og gi oss en mulighet til å skape perfeksjon. La oss samarbeide for å skape det neste «nullfeil»-mirakelet.

Detaljer
GEEKVALUE

Geekvalue: Født for Pick-and-Place-maskiner

One-stop løsningsleder for brikkemontering

Om oss

Som leverandør av utstyr til elektronikkindustrien tilbyr Geekvalue en rekke nye og brukte maskiner og tilbehør fra anerkjente merker til meget konkurransedyktige priser.

Kontaktadresse:Nr. 18, Shangliao Industrial Road, Shajing Town, Baoan District, Shenzhen, Kina

Konsultasjonstelefonnummer:+86 13823218491

E-post:smt-sales9@gdxinling.cn

KONTAKT OSS

© Alle rettigheter reservert. Teknisk støtte: TiaoQingCMS

kfweixin

Skann for å legge til WeChat

Be om tilbud