product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

Nga korero

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Tirohanga Matakite

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Whakatakotoranga Hangarau

TawhāWhakatakotoranga
WaitohuGKG
TauiraG5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Te Tika o te Ta±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
Rahi PCB50 × 50–400 × 340 mm
PCB Matotoru0.4–6 mm
Maximum PCB Weight3 kg
Rahi anga TaapiriUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Te Peehanga Tiaki0–10 kg
Tere Tere6–300 mm/sec
Tere Kaituku100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
Pūnaha MatakiteUpward and downward CCD imaging
Control MethodPC Control
Te Peehanga Hau4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

He aha te tini o nga tangata i whiriwhiri ki te mahi me GeekValue?

Kei te horahia to maatau tohu mai i tetahi taone ki tetahi taone nui, a he maha nga tangata i patai mai ki ahau, "He aha te GeekValue?" I ahu mai i te tirohanga ngawari: ki te whakamana i nga mahi hou a Haina me nga hangarau hou. He wairua tohu tenei mo te whakapai tonu, e huna ana i roto i ta maatau whainga mo nga taipitopito me te koa o te nui o nga tumanako me nga tuku katoa. Ko tenei mahi toi me te whakatapua, ehara i te mea ko te tohe tonu o o tatou kaihanga, engari ko te mauri me te mahana o to tatou waitohu. Te ti'aturi nei matou ka timata koe i konei me te whai waahi ki te hanga tino pai. Kia mahi tahi tatou ki te hanga i te merekara "kore koha" e whai ake nei.

Nga korero
GEEKVALUE

Geekvalue: I whanau mo nga Miihini Tiki-me-Whi

Kaihautu otinga kotahi-mutu mo te putunga maramara

Mo matou

Hei kaiwhakarato taputapu mo te ahumahi hanga hiko, ka tukuna e Geekvalue nga momo miihini hou me nga miihini me nga taputapu mai i nga waitohu rongonui i nga utu tino whakataetae.

Wāhitau whakapā:Nama 18, Shangliao Industrial Road, Shajing Town, Baoan District, Shenzhen, Haina

Tau waea korero:+86 13823218491

Īmēra:smt-sales9@gdxinling.cn

WHAKAPAKI MAI

© Mana Katoa. Tautoko Hangarau: TiaoQingCMS

kfweixin

Matawai hei taapiri WeChat

Tono Tono