product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

Дэталі

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Выраўноўванне зроку

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Тэхнічныя характарыстыкі

ПараметрСпецыфікацыя
БрэндGKG
МадэльГ5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Дакладнасць друку±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
Памер друкаванай платы50 × 50–400 × 340 mm
Таўшчыня друкаванай платы0,4–6 мм
Maximum PCB Weight3 kg
Памер рамкі трафарэтаUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Ціск скребка0–10 kg
Хуткасць швабры6–300 mm/sec
Хуткасць канвеера100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
Сістэма бачанняUpward and downward CCD imaging
Control MethodPC Control
Ціск паветра4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

Чаму так шмат людзей выбіраюць супрацоўніцтва з GeekValue?

Наш брэнд распаўсюджваецца з горада ў горад, і незлічоныя людзі пытаюцца ў мяне: «Што такое GeekValue?» Гэта вынікае з простай мэты: узмацніць кітайскія інавацыі з дапамогай перадавых тэхналогій. Гэта дух брэнда, які грунтуецца на пастаяннай паляпшэнні, схаваны ў нашым нястомным імкненні да дэталяў і задавальненні ад пераўзыходжання чаканняў з кожнай пастаўкай. Гэта амаль апантанае майстэрства і адданасць справе — гэта не толькі настойлівасць нашых заснавальнікаў, але і сутнасць і цеплыня нашага брэнда. Мы спадзяемся, што вы пачнеце тут і дасце нам магчымасць стварыць дасканаласць. Давайце разам працаваць над стварэннем наступнага цуду «нулявых дэфектаў».

Дэталі
GEEKVALUE

Geekvalue: народжаны для аўтаматаў Pick-and-Place

Універсальнае рашэнне для ўстаноўкі мікрасхем

Пра нас

Як пастаўшчык абсталявання для прамысловасці вытворчасці электронікі, Geekvalue прапануе шэраг новых і патрыманых машын і аксесуараў ад вядомых брэндаў па вельмі канкурэнтаздольным цэнах.

Кантактны адрас:No. 18, Shangliao Industrial Road, Shajing Town, Baoan District, Shenzhen, Кітай

Нумар тэлефона для кансультацый:+86 13823218491

Электронная пошта:smt-sales9@gdxinling.cn

ЗВЯЖЫЦЕСЯ З НАМІ

© Усе правы абаронены. Тэхнічная падтрымка: TiaoQingCMS

kfweixin

Сканіруйце, каб дадаць WeChat

Запытаць прапанову