product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

Bliższe dane

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Wyrównanie wizji

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Dane techniczne

ParametrSpecyfikacja
MarkaGKG
ModelG5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Dokładność drukowania±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
Rozmiar PCB50 × 50–400 × 340 mm
Grubość PCB0,4–6 mm
Maksymalna waga PCB3 kg
Rozmiar ramki szablonuUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Nacisk ściągaczki0–10 kg
Prędkość ściągaczki6–300 mm/sec
Prędkość przenośnika100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
System wizyjnyUpward and downward CCD imaging
Control MethodPC Control
Ciśnienie powietrza4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

Dlaczego tak wiele osób decyduje się na współpracę z GeekValue?

Nasza marka rozprzestrzenia się z miasta do miasta, a niezliczone rzesze ludzi pytały mnie: „Czym jest GeekValue?”. Wywodzi się z prostej wizji: wspierać chińską innowacyjność dzięki najnowocześniejszej technologii. To duch ciągłego doskonalenia, ukryty w naszym nieustannym dążeniu do detalu i radości z przekraczania oczekiwań z każdą dostawą. To niemal obsesyjne rzemiosło i zaangażowanie to nie tylko wytrwałość naszych założycieli, ale także istota i ciepło naszej marki. Mamy nadzieję, że zaczniesz od nas i dasz nam szansę na stworzenie perfekcji. Pozwól nam wspólnie stworzyć kolejny cud „zero defektów”.

Bliższe dane
GEEKVALUE

Geekvalue: Stworzone do maszyn Pick-and-Place

Lider kompleksowych rozwiązań dla montażu układów scalonych

O nas

Jako dostawca sprzętu dla przemysłu elektronicznego, Geekvalue oferuje szereg nowych i używanych maszyn i akcesoriów renomowanych marek w bardzo konkurencyjnych cenach.

Adres kontaktowy:Nr 18, Shangliao Industrial Road, Shajing Town, Baoan District, Shenzhen, Chiny

Numer telefonu konsultacyjnego:+86 13823218491

E-mail:smt-sales9@gdxinling.cn

SKONTAKTUJ SIĘ Z NAMI

© Wszelkie prawa zastrzeżone. Wsparcie techniczne: TiaoQingCMS

kfweixin

Zeskanuj, aby dodać WeChat

Poproś o wycenę