product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

Detalhes

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Alinhamento da Visão

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Especificações técnicas

ParâmetroEspecificação
MarcaGKG
ModeloG5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Precisão de impressão±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
Tamanho do PCB50 × 50–400 × 340 mm
Espessura da placa de circuito impresso0,4–6 mm
Peso máximo da placa de circuito impresso3 kg
Tamanho da moldura do estêncilUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Pressão do rodo0–10 kg
Velocidade do rodo6–300 mm/sec
Velocidade do transportador100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
Sistema de VisãoUpward and downward CCD imaging
Control MethodPC Control
Pressão do ar4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

Por que tantas pessoas escolhem trabalhar com a GeekValue?

Nossa marca está se espalhando de cidade em cidade, e inúmeras pessoas me perguntam: "O que é GeekValue?". Ela surge de uma visão simples: potencializar a inovação chinesa com tecnologia de ponta. Este é o espírito da marca de melhoria contínua, oculto em nossa busca incansável por detalhes e no prazer de superar expectativas a cada entrega. Esse trabalho artesanal e dedicação quase obsessivos não são apenas a persistência de nossos fundadores, mas também a essência e o calor da nossa marca. Esperamos que você comece aqui e nos dê a oportunidade de criar a perfeição. Vamos trabalhar juntos para criar o próximo milagre "zero defeitos".

Detalhes
GEEKVALUE

Geekvalue: Nascido para máquinas de pegar e colocar

Líder em soluções completas para montador de chips

Sobre nós

Como fornecedora de equipamentos para a indústria de fabricação de eletrônicos, a Geekvalue oferece uma variedade de máquinas e acessórios novos e usados ​​de marcas renomadas a preços muito competitivos.

Endereço para contato:No. 18, Shangliao Industrial Road, Shajing Town, Distrito de Baoan, Shenzhen, China

Número de telefone para consulta:+86 13823218491

E-mail:smt-sales9@gdxinling.cn

CONTATE-NOS

© Todos os direitos reservados. Suporte técnico: TiaoQingCMS

kfweixin

Digitalize para adicionar WeChat

Solicitar orçamento