product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

Καθέκαστα

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Ευθυγράμμιση όρασης

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Τεχνικές προδιαγραφές

ΠαράμετροςΠροσδιορισμός
ΜάρκαGKG
ΜοντέλοG5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Ακρίβεια εκτύπωσης±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
Μέγεθος PCB50 × 50–400 × 340 mm
Πάχος PCB0,4–6 χιλιοστά
Maximum PCB Weight3 kg
Μέγεθος πλαισίου στένσιλUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Πίεση ελαστικού μάκτρου0–10 kg
Ταχύτητα μάκτρου6–300 mm/sec
Ταχύτητα μεταφορέα100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
Σύστημα όρασηςUpward and downward CCD imaging
Control MethodPC Control
Πίεση αέρα4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

Γιατί τόσοι πολλοί άνθρωποι επιλέγουν να συνεργαστούν με την GeekValue;

Η επωνυμία μας εξαπλώνεται από πόλη σε πόλη και αμέτρητοι άνθρωποι με έχουν ρωτήσει: «Τι είναι η GeekValue;» Πηγάζει από ένα απλό όραμα: να ενδυναμώσουμε την κινεζική καινοτομία με τεχνολογία αιχμής. Αυτό είναι ένα πνεύμα συνεχούς βελτίωσης, κρυμμένο στην αδιάκοπη επιδίωξή μας για λεπτομέρεια και την απόλαυση της υπέρβασης των προσδοκιών με κάθε παράδοση. Αυτή η σχεδόν εμμονική δεξιοτεχνία και αφοσίωση δεν είναι μόνο η επιμονή των ιδρυτών μας, αλλά και η ουσία και η ζεστασιά της επωνυμίας μας. Ελπίζουμε ότι θα ξεκινήσετε από εδώ και θα μας δώσετε την ευκαιρία να δημιουργήσουμε την τελειότητα. Ας συνεργαστούμε για να δημιουργήσουμε το επόμενο θαύμα «μηδενικών ελαττωμάτων».

Καθέκαστα
GEEKVALUE

Geekvalue: Γεννήθηκε για μηχανές επιλογής και τοποθέτησης

Ηγέτης λύσης μιας στάσης για βάση στήριξης τσιπ

Σχετικά με εμάς

Ως προμηθευτής εξοπλισμού για τη βιομηχανία παραγωγής ηλεκτρονικών ειδών, η Geekvalue προσφέρει μια σειρά από νέα και μεταχειρισμένα μηχανήματα και αξεσουάρ από γνωστές μάρκες σε πολύ ανταγωνιστικές τιμές.

Διεύθυνση επικοινωνίας:No. 18, Shangliao Industrial Road, Shajing Town, Baoan District, Shenzhen, Κίνα

Τηλέφωνο συμβουλευτικής:+86 13823218491

E-mail:smt-sales9@gdxinling.cn

ΕΠΙΚΟΙΝΩΝΗΣΤΕ ΜΑΖΙ ΜΑΣ

© Με την επιφύλαξη παντός δικαιώματος. Τεχνική υποστήριξη: TiaoQingCMS

kfweixin

Σάρωση για προσθήκη WeChat

Αίτημα Προσφοράς