product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

Üksikasjad

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Nägemise joondamine

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Tehnilised andmed

ParameeterSpetsifikatsioon
BrändGKG
MudelG5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Printimise täpsus±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
PCB suurus50 × 50–400 × 340 mm
PCB paksus0,4–6 mm
Maximum PCB Weight3 kg
Šablooni raami suurusUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Kaabitsa rõhk0–10 kg
Kaabitsa kiirus6–300 mm/sec
Konveieri kiirus100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
NägemissüsteemUpward and downward CCD imaging
Control MethodPC Control
Õhurõhk4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

Miks nii paljud inimesed otsustavad GeekValue'iga koostööd teha?

Meie bränd levib linnast linna ja lugematud inimesed on minult küsinud: "Mis on GeekValue?" See tuleneb lihtsast visioonist: anda Hiina innovatsioonile jõudu tipptehnoloogiaga. See on pideva täiustamise brändi vaim, mis on peidus meie lakkamatus detailitäpsuses ja ootuste ületamise rõõmus iga tarnega. See peaaegu obsessiivne meisterlikkus ja pühendumus ei ole mitte ainult meie asutajate visadus, vaid ka meie brändi olemus ja soojus. Loodame, et alustate siit ja annate meile võimaluse luua täiuslikkust. Tehkem koos tööd, et luua järgmine "nulldefekti" ime.

Üksikasjad
GEEKVALUE

Geekvalue: sündinud vali ja aseta masinate jaoks

Ühekordne lahendusjuht kiibi paigaldamiseks

Meie kohta

Elektroonikatööstuse seadmete tarnijana pakub Geekvalue väga konkurentsivõimeliste hindadega valikut uusi ja kasutatud masinaid ja tarvikuid tuntud kaubamärkidelt.

Kontaktaadress:Nr 18, Shangliao Industrial Road, Shajing Town, Baoani piirkond, Shenzhen, Hiina

Konsultatsiooni telefoninumber:+86 13823218491

E-post:smt-sales9@gdxinling.cn

VÕTA MEIEGA ÜHENDUST

© Kõik õigused kaitstud. Tehniline tugi: TiaoQingCMS

kfweixin

WeChati lisamiseks skannige

Küsi pakkumist