product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

Maelezo

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Mpangilio wa Maono

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Maelezo ya kiufundi

KigezoVipimo
ChapaGKG
MfanoG5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Usahihi wa Uchapishaji±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
Ukubwa wa PCB50 × 50–400 × 340 mm
Unene wa PCB0.4-6 mm
Maximum PCB Weight3 kg
Ukubwa wa Fremu ya StencilUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Shinikizo la Squeegee0–10 kg
Kasi ya Squeegee6–300 mm/sec
Kasi ya Conveyor100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
Mfumo wa MaonoUpward and downward CCD imaging
Control MethodPC Control
Shinikizo la Hewa4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

Kwa nini watu wengi huchagua kufanya kazi na GeekValue?

Chapa yetu inaenea kutoka jiji hadi jiji, na watu wengi wameniuliza, "GeekValue ni nini?" Inatokana na maono rahisi: kuwezesha uvumbuzi wa Kichina kwa teknolojia ya kisasa. Huu ni ari ya chapa ya uboreshaji endelevu, iliyofichwa katika utafutaji wetu wa kina na furaha ya kuzidi matarajio kwa kila utoaji. Ustadi huu wa karibu wa obsessive na kujitolea sio tu kuendelea kwa waanzilishi wetu, lakini pia kiini na joto la brand yetu. Tunatumahi utaanza hapa na kutupa fursa ya kuunda ukamilifu. Wacha tufanye kazi pamoja kuunda muujiza unaofuata wa "sifuri kasoro".

Maelezo
GEEKVALUE

Geekvalue: Alizaliwa kwa Mashine ya Chagua-na-Mahali

Kiongozi wa suluhisho la kusimama moja kwa kiweka chip

Kuhusu Sisi

Kama msambazaji wa vifaa kwa tasnia ya utengenezaji wa vifaa vya elektroniki, Geekvalue hutoa anuwai ya mashine mpya na zilizotumika na vifaa kutoka kwa chapa maarufu kwa bei za ushindani sana.

Anwani ya mawasiliano:Nambari 18, Barabara ya Viwanda ya Shangliao, Mji wa Shajing, Wilaya ya Baoan, Shenzhen, Uchina

Nambari ya simu ya mashauriano:+86 13823218491

Barua pepe:smt-sales9@gdxinling.cn

WASILIANA NASI

© Haki Zote Zimehifadhiwa. Usaidizi wa Kiufundi:TiaoQingCMS

kfweixin

Changanua ili kuongeza WeChat

Omba Nukuu