product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

Részletek

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Látásigazítás

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Műszaki adatok

ParaméterSpecifikáció
MárkaGKG
ModellG5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Nyomtatási pontosság±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
NYÁK-méret50 × 50–400 × 340 mm
NYÁK vastagsága0,4–6 mm
Maximum PCB Weight3 kg
Sablonkeret méreteUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Lehúzónyomás0–10 kg
Lehúzó sebessége6–300 mm/sec
Szállítószalag sebessége100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
KépernyőrendszerUpward and downward CCD imaging
Control MethodPC Control
Légnyomás4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

Miért választják annyian a GeekValue-t?

Márkánk városról városra terjed, és számtalan ember kérdezte már tőlem: "Mi az a GeekValue?" Egy egyszerű vízióból fakad: a kínai innovációt élvonalbeli technológiával felruházni. Ez a folyamatos fejlesztés márkaszelleme, amely a részletek iránti szüntelen törekvésünkben és az elvárások minden egyes szállítmánnyal való felülmúlásának örömében rejlik. Ez a szinte megszállott mesterségbeli tudás és elkötelezettség nemcsak alapítóink kitartása, hanem márkánk lényege és melegsége is. Reméljük, hogy itt kezdik, és lehetőséget adnak nekünk a tökéletesség megteremtésére. Dolgozzunk együtt a következő "hiba nélküli" csodáért.

Részletek
GEEKVALUE

Geekvalue: A Pick-and-Place Machines számára született

Egyablakos megoldás-vezető forgácsszerelőhöz

Rólunk

Az elektronikai gyártóipar berendezéseinek szállítójaként a Geekvalue számos új és használt gépet és tartozékot kínál neves márkáktól, rendkívül versenyképes áron.

Elérhetőségi cím:No. 18, Shangliao Industrial Road, Shajing Town, Baoan District, Shenzhen, Kína

Konzultációs telefonszám:+86 13823218491

Email:smt-sales9@gdxinling.cn

KAPCSOLAT

© Minden jog fenntartva. Technikai támogatás: TiaoQingCMS

kfweixin

Szkennelés a WeChat hozzáadásához

Árajánlat kérése