product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

Подробности

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Подравняване на зрението

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Технически спецификации

ПараметърСпецификация
МаркаGKG
МоделГ5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Точност на печат±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
Размер на печатната платка50 × 50–400 × 340 mm
Дебелина на печатната платка0,4–6 мм
Maximum PCB Weight3 kg
Размер на рамката на шаблонаUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Налягане на гумената гума0–10 kg
Скорост на гумената гума6–300 mm/sec
Скорост на конвейера100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
Система за зрениеUpward and downward CCD imaging
Control MethodPC Control
Въздушно налягане4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

Защо толкова много хора избират да работят с GeekValue?

Нашата марка се разпространява от град на град и безброй хора ме питат: „Какво е GeekValue?“ Тя произтича от една проста визия: да дадем възможност на китайските иновации с авангардни технологии. Това е дух на марката за непрекъснато усъвършенстване, скрит в нашето неуморно преследване на детайлите и удоволствието от надминаването на очакванията с всяка доставка. Това почти обсесивно майсторство и всеотдайност е не само постоянството на нашите основатели, но и същността и топлината на нашата марка. Надяваме се, че ще започнете оттук и ще ни дадете възможност да създадем съвършенство. Нека работим заедно, за да създадем следващото чудо с „нулеви дефекти“.

Подробности
GEEKVALUE

Geekvalue: роден за машини за избор и поставяне

Лидер на едно гише за монтаж на чипове

За нас

Като доставчик на оборудване за индустрията за производство на електроника, Geekvalue предлага набор от нови и употребявани машини и аксесоари от реномирани марки на много конкурентни цени.

Адрес за контакт:No. 18, Shangliao Industrial Road, Shajing Town, Baoan District, Шенжен, Китай

Телефонен номер за консултации:+86 13823218491

Имейл:smt-sales9@gdxinling.cn

СВЪРЖЕТЕ СЕ С НАС

© Всички права запазени. Техническа поддръжка: TiaoQingCMS

kfweixin

Сканирайте, за да добавите WeChat

Заявка за оферта