product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

Detaylar

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Vizyon Hizalaması

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Teknik Özellikler

ParametreŞartname
MarkaGKG
ÖrnekG5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Baskı Doğruluğu±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
PCB Boyutu50 × 50–400 × 340 mm
PCB Kalınlığı0,4–6 mm
Maximum PCB Weight3 kg
Şablon Çerçeve BoyutuUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Rakle Basıncı0–10 kg
Rakle Hızı6–300 mm/sec
Konveyör Hızı100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
Görüntü SistemiUpward and downward CCD imaging
Control MethodPC Control
Hava Basıncı4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

Neden bu kadar çok insan GeekValue ile çalışmayı tercih ediyor?

Markamız şehirden şehre yayılıyor ve sayısız kişi bana "GeekValue nedir?" diye sordu. Basit bir vizyondan doğuyor: Çin inovasyonunu en son teknolojiyle güçlendirmek. Bu, detaylara olan amansız arayışımızda ve her teslimatta beklentileri aşmanın verdiği mutlulukta saklı, sürekli gelişim odaklı bir marka ruhu. Bu neredeyse takıntılı işçilik ve özveri, yalnızca kurucularımızın azmini değil, aynı zamanda markamızın özünü ve sıcaklığını da yansıtıyor. Umarız buradan başlar ve bize mükemmelliği yaratma fırsatı verirsiniz. Bir sonraki "sıfır hata" mucizesini yaratmak için birlikte çalışalım.

Detaylar
GEEKVALUE

Geekvalue: Pick-and-Place Makineleri İçin Doğdu

Çip montajcıları için tek elden çözüm lideri

Hakkımızda

Elektronik üretim sektörüne ekipman tedarikçisi olan Geekvalue, tanınmış markaların yeni ve kullanılmış makine ve aksesuarlarını çok rekabetçi fiyatlarla sunmaktadır.

İletişim adresi:No. 18, Shangliao Endüstri Yolu, Shajing Kasabası, Baoan Bölgesi, Shenzhen, Çin

Danışma telefon numarası:+86 13823218491

E-posta:smt-sales9@gdxinling.cn

BİZE ULAŞIN

© Tüm Hakları Saklıdır. Teknik Destek:TiaoQingCMS

kfweixin

WeChat'i eklemek için tarayın

Teklif İsteyin