product
GKG G5 Automatic SMT Stencil Printer

GKG G5 Automatic SMT Stencil Printer

GKG G5 automatic SMT stencil printer featuring dual motorized print heads, ±0.025 mm printing accuracy, vision alignment and automatic stencil cleaning.

Detalės

The GKG G5 is a fully automatic SMT stencil printer used for solder paste printing on printed circuit boards (PCBs). It features two independent motorized print heads, an up-and-down vision system, and automatic stencil cleaning.

The machine uses a CCD camera system to recognize PCB fiducial marks and align the stencil before printing. Its dual print-head structure provides independent squeegee movement, while software-controlled pressure and printing speed allow operators to adjust printing conditions for different PCB and stencil requirements.

The GKG G5 has a documented repeat positioning accuracy of ±0.01 mm and printing accuracy of ±0.025 mm. Its PCB handling system supports board sizes from 50 × 50 mm to 400 × 340 mm.

Printing System

The G5 uses two independent motorized print heads rather than a single mechanically driven squeegee assembly. Printing pressure is software-controlled with closed-loop pressure feedback. Operators can adjust squeegee speed, pressure, and angle according to the printing process.

Regėjimo suderinimas

The CCD vision system uses upward and downward imaging to identify PCB fiducial marks and support stencil positioning. The optical system combines ring illumination and coaxial lighting to recognize different fiducial mark surfaces.

Automatic Stencil Cleaning

The cleaning system supports three modes: dry, wet, and vacuum. Cleaning combinations can be programmed through the machine software to remove solder paste residue from the underside of the stencil.

PCB Positioning and Transport

The PCB support system supports magnetic pins and side support blocks, with flexible automatic pin arrangements available as an option. The conveyor features automatic rail-width adjustment and programmable transport speed. Supported transfer directions include Left-to-Right, Right-to-Left, Left-to-Left, and Right-to-Right.

Techninės specifikacijos

ParametrasSpecifikacija
Prekės ženklasGKG
ModelisG5
Machine TypeFully Automatic SMT Stencil Printer
Repeat Positioning Accuracy±0.01 mm
Spausdinimo tikslumas±0.025 mm
Core Cycle TimeLess than 8 seconds, excluding printing and cleaning
PCB dydis50 × 50–400 × 340 mm
PCB storis0,4–6 mm
Maximum PCB Weight3 kg
Trafareto rėmelio dydisUp to 737 × 737 mm
Stencil Frame Thickness20–40 mm
Print HeadsTwo independent motorized print heads
Valytuvo slėgis0–10 kg
Valytuvo greitis6–300 mm/sec
Konvejerio greitis100–1500 mm/sec
Conveyor Height900 ±40 mm
Conveyor DirectionL-R, R-L, L-L, R-R
Cleaning ModesDry, Wet, Vacuum
Regėjimo sistemaUpward and downward CCD imaging
Control MethodPC Control
Oro slėgis4–6 kg/cm²

Specifications are based on published GKG G5 technical information. PCB size, conveyor configuration, and optional functions should be confirmed against the actual machine version.

GKG G5 SMT Stencil Printer for Sale

Looking for a GKG G5 automatic solder paste printer? Contact us for machine availability, actual equipment photos, technical specifications, and pricing.

Send us your requirements to receive a quotation.

GKG G5 Automatic SMT Stencil Printer

Kodėl tiek daug žmonių renkasi dirbti su „GeekValue“?

Mūsų prekės ženklas plinta iš miesto į miestą, ir daugybė žmonių manęs klausia: „Kas yra „GeekValue“?“. Jis kyla iš paprastos vizijos: įgalinti Kinijos inovacijas pažangiausiomis technologijomis. Tai nuolatinio tobulėjimo prekės ženklo dvasia, slypinti mūsų nenuilstamame detalių siekime ir džiaugsme, kad kiekvienas pristatymas pranoksta lūkesčius. Šis beveik įkyrus meistriškumas ir atsidavimas yra ne tik mūsų įkūrėjų atkaklumas, bet ir mūsų prekės ženklo esmė bei šiluma. Tikimės, kad pradėsite čia ir suteiksite mums galimybę kurti tobulumą. Dirbkime kartu, kad sukurtume kitą „nulio defekto“ stebuklą.

Detalės
GEEKVALUE

Geekvalue: gimęs rinkimo ir vietos mašinoms

Vieno langelio sprendimas, skirtas lustų montuotojui

Apie mus

Kaip įrangos tiekėja elektronikos gamybos pramonei, „Geekvalue“ siūlo daugybę naujų ir naudotų mašinų bei priedų iš žinomų prekių ženklų labai konkurencingomis kainomis.

Kontaktinis adresas:18, Shangliao Industrial Road, Shajing Town, Baoan rajonas, Šendženas, Kinija

Konsultacijos telefono numeris:+86 13823218491

El. paštas:smt-sales9@gdxinling.cn

SUSISIEKITE SU MUMIS

© Visos teisės saugomos. Techninė pagalba: TiaoQingCMS

kfweixin

Nuskaitykite, kad pridėtumėte „WeChat“.

Užklausos dėl kainos